HP laserjet MFP m28 w lenta a reagire

Aperto da ayler, Giovedì 24 Gennaio 2019, 11:08:17

Discussione precedente - Discussione successiva

andrea111

Com'è che la versione che hai installata risulta essere la 3.17.10?
Prima avevi postato un hp-check che diceva
CitazioneHP Linux Imaging and Printing System (ver. 3.18.9)
E poi mancherebbe il pacchetto hplip che dovrebbe essere il più importante.

In ogni caso, se guardi Q U I vedi che per quella stampante sarebbero richiesti i driver versione 3.18.04 (o superiori).

Vediamo di chiarire questo mistero: dai di nuovo e in successione dpkg-query -l | grep -i hplip
hp-check -r
e posta tutto insieme.

Nota Bene:
il collegamento da cui scaricare gli ultimi driver è Q U E S T O dopo aver selezionato la distro in cui installi (Linux Mint). Per ora non scaricare nulla, lascia tutto com'è.

Portatile ASUS con Scheda madre X55C +i5-3210M -- 6 GB RAM ddr3 -- grafica intel.

ayler

Ho installato HPLIP 3.19.1. Non riuscivo a scaricare il plugin durante l0installazione e allora l'ho preso QUI.
Ecco i risultati:
dpkg-query -l | grep -i hplip

ii  hplip-data                                 3.17.10+repack0-5                                all          HP Linux Printing and Imaging - data files
rc  hplip-gui                                  3.17.10+repack0-5                                all          HP Linux Printing and Imaging - GUI utilities (Qt-based

hp-check -r

Saving output in log file: /home/donatella/hp-check.log

HP Linux Imaging and Printing System (ver. 3.19.1)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                   
2. Run-time check mode (-r or --run): Use this mode to determine if a distro   
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                     
3. Both compile- and run-time check mode (-b or --both) (Default): This mode   
will check both of the above cases (both compile- and run-time dependencies).   

Check types:                                                                   
a. EXTERNALDEP - External Dependencies                                         
b. GENERALDEP - General Dependencies (required both at compile and run time)   
c. COMPILEDEP - Compile time Dependencies                                       
d. [All are run-time checks]                                                   
PYEXT SCANCONF QUEUES PERMISSION                                               

Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version

warning: 22-19.1 version is not supported. Using 22-19 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------

Kernel: 4.15.0-45-generic #48-Ubuntu SMP Tue Jan 29 16:28:13 UTC 2019 GNU/Linux
Host: donatella-HP-Pavilion-g6-Notebook-PC
Proc: 4.15.0-45-generic #48-Ubuntu SMP Tue Jan 29 16:28:13 UTC 2019 GNU/Linux
Distribution: 22 19.1
Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.19.1
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 22 distro  19.1 version

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.19.1

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.19.1
html=/usr/share/doc/hplip-3.19.1
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.19.1
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
qt5=no
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no


Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.19.1



Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1549887642
pending_upgrade_time = 0
latest_available_version = 3.17.10

[settings]
systray_visible = 0
systray_messages = 0

[last_used]
device_uri = "hp:/net/HP_LaserJet_MFP_M28-M31?ip=192.168.1.6"
printer_name =
working_dir = .

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list =

[fax]
voice_phone =
email_address =

[installation]
date_time = 11/02/2019 17:51:18
version = 3.19.1


<Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

--------------
| COMPILEDEP |
--------------

gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               7.3.0           OK         -
make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.1             OK         -
libtool              libtool - Library building support services                  REQUIRED        -               2.4.6           OK         -

------------------------
| General Dependencies |
------------------------

libcrypto            libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.1.0           OK         -
python-xml           Python XML libraries                                         REQUIRED        -               2.2.5           OK         -
libnetsnmp-devel     libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           5.7.3           OK         -
sane-devel           SANE - Scanning library development files                    REQUIRED        -               -               OK         -
pil                  PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               1.1.7           OK         -
pyqt4-dbus           PyQt 4 DBus - DBus Support for PyQt4                         REQUIRED        4.0             4.12.1          OK         -
libpthread           libpthread - POSIX threads library                           REQUIRED        -               2.27            OK         -
python-devel         Python devel - Python development files                      REQUIRED        2.2             2.7.15          OK         -
cups-devel           CUPS devel- Common Unix Printing System development files    REQUIRED        -               2.2.7           OK         -
python-dbus          Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.6           OK         -
cups-ddk             CUPS DDK - CUPS driver development kit                       OPTIONAL        -               -               OK         -
reportlab            Reportlab - PDF library for Python                           OPTIONAL        2.0             3.4.0           OK         -
pyqt4                PyQt 4- Qt interface for Python (for Qt version 4.x)         REQUIRED        4.0             4.12.1          OK         -
libusb               libusb - USB library                                         REQUIRED        -               1.0             OK         -
cups-image           CUPS image - CUPS image development files                    REQUIRED        -               2.2.7           OK         -
python2X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             2.7.15          OK         -
python-notify        Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               OK         -
libjpeg              libjpeg - JPEG library                                       REQUIRED        -               -               OK         -
sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -

----------------------
| Scan Configuration |
----------------------

scanext              Scan-SANE-Extension                                          REQUIRED        -               3.19.1          OK         -
hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.19.1          OK         'hpaio found in /etc/sane.d/dll.conf'

-------------------------
| External Dependencies |
-------------------------

gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.26            OK         -
scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.27          OK         -
cups                 CUPS - Common Unix Printing System                           REQUIRED        1.1             2.2.7           OK         'CUPS Scheduler is running'
network              network -wget                                                OPTIONAL        -               1.19.4          OK         -
policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.105           OK         -
xsane                xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             0.999           OK         -
dbus                 DBus - Message bus system                                    REQUIRED        -               1.12.2          OK         -
avahi-utils          avahi-utils                                                  OPTIONAL        -               0.7             OK         -

---------------------
| Python Extentions |
---------------------

hpmudext             IO-Extension                                                 REQUIRED        -               3.19.1          OK         -
cupsext              CUPS-Extension                                               REQUIRED        -               3.19.1          OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `hpaio:/net/HP_LaserJet_MFP_M28-M31?ip=192.168.1.6' is a Hewlett-Packard HP_LaserJet_MFP_M28-M31 all-in-one
device `hpaio:/net/HP_LaserJet_MFP_M28-M31?ip=192.168.1.6' is a Hewlett-Packard HP_LaserJet_MFP_M28-M31 all-in-one


--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------


HP_LaserJet_MFP_M28-M31
-----------------------
Type: Printer
Device URI: hp:/net/HP_LaserJet_MFP_M28-M31?ip=192.168.1.6
PPD: /etc/cups/ppd/HP_LaserJet_MFP_M28-M31.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_MFP_M28-M31.ppd ppd file
PPD Description:
Printer status: la stampante HP_LaserJet_MFP_M28-M31 è inattiva.  è stata abilitata da lun 11 feb 2019 17:26:47 CET
Communication status: Good

HP_LaserJet_MFP_M28w_B0D94D_
----------------------------
Type: Unknown
Device URI: ipps://NPIB0D94D.local:631/ipp/print
PPD: /etc/cups/ppd/HP_LaserJet_MFP_M28w_B0D94D_.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_MFP_M28w_B0D94D_.ppd ppd file
PPD Description:
Printer status: la stampante HP_LaserJet_MFP_M28w_B0D94D_ è inattiva.  è stata abilitata da lun 11 feb 2019 17:25:49 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.


--------------
| PERMISSION |
--------------


-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
None

Missing Optional Dependencies
-----------------------------
None


Total Errors: 0
Total Warnings: 1


Done.


La stampa ultimamente non mi ha dato problemi particolari, non è veloce ma tutto sommato accettabile. Lo scanner invece è lentissimo nell'avviarsi e nel passaggio tra le varie fasi.
Nostra patria è il mondo intero / nostra legge è la libertà (Pietro Gori, 1895)
https://youtu.be/ZWRji_4cvsU

andrea111

#17
Che cosa usi per scannerizzare? simple-scan o sane o xsane.

Xsane è il più fornito e funzionale. Installalo se già non lo hai fatto.

Per migliorare la stampa puoi provare uno di questi comandi lpadmin -p HP_LaserJet_MFP_M28-M31 -o pdftops-renderer-default=pdftopsoppure lpadmin -p HP_LaserJet_MFP_M28-M31 -o pdftops-renderer-default=pdftocairodai uno di questi, riavvia e poi provi la stampa, poi dai l'altro, riavvii e riprovi la stampa. E vedi se ci sono significative differenze tra l'uno e l'altro.

Per riportare la situazione allo stato originario dai lpadmin -p HP_LaserJet_MFP_M28-M31 -R pdftops-renderer-default

Portatile ASUS con Scheda madre X55C +i5-3210M -- 6 GB RAM ddr3 -- grafica intel.

ayler

Io uso sempre xsane, ma anche con simple scan il comportamento è lo stesso. Domani proverò con i comandi che mi hai indicato.
:ciao:
Nostra patria è il mondo intero / nostra legge è la libertà (Pietro Gori, 1895)
https://youtu.be/ZWRji_4cvsU

andrea111

Fai un altro controllo per lo scanner con hp-diagnose_plugin
Dovrebbe dirti
CitazioneDevice Plugin is already installed
Se il plugin non dovesse essere essere installato si dovrà installarlo. (ma non credo)

Portatile ASUS con Scheda madre X55C +i5-3210M -- 6 GB RAM ddr3 -- grafica intel.

ayler

Rieccomi. Le cose vanno male. Allora al comando hp-diagnose_plugin

mi esce
HP Linux Imaging and Printing System (ver. 3.19.1)
Diagnose Plugin Utility ver. 1.0

Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.19.1)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.19.1)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Checking for network connection...
Downloading plug-in from:
Receiving digital keys: /usr/bin/gpg --homedir /home/donatella/.hplip/.gnupg --no-permission-warning --keyserver pgp.mit.edu --recv-keys 0x4ABA2F66DBD5A95894910E0673D770CDA59047B9
Creating directory plugin_tmp
Verifying archive integrity... All good.
Uncompressing HPLIP 3.19.1 Plugin Self Extracting Archive..............................................................

HP Linux Imaging and Printing System (ver. 3.19.1)
Plugin Installer ver. 3.0

Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Plug-in version: 3.19.1
Installed HPLIP version: 3.19.1
Number of files to install: 64

Plugin installation failed
error: Python gobject/dbus may be not installed
error: Plug-in install failed.

Done.
error: Failed to install Plug-in.
Either you have chosen to skip the Plug-in installation  or entered incorrect Password.

Allora ho provato a reinstallare HPLIP coll risultato che ora quando faccio partire XSANE mi esce

Contemporaneamente parte la procedura di installazione del plugin mancante che si arresta subito così:


Per quanto riguarda la stampante ultimamente andava abbastanza bene, se non fosse che un giorno non mi stampava più i folgli di calc!
Dopo avere reinstallato HPLIP la stampa si è ripresa, non credo per merito suo perché nel toolbox la stampante non si installa. da wifi.
Comincio a perdere le speranze :bonk:
Nostra patria è il mondo intero / nostra legge è la libertà (Pietro Gori, 1895)
https://youtu.be/ZWRji_4cvsU

angelomarra

vedo che non sonp l'unico ad aver problemi con il lato scanner di una Multi Function Printer di HP. E meno male che le HP sono compatibili con linux..... se non lo fossero come staremmo?

andrea111

Dal Gestore Pacchetti verifica se hai installato gobject-introspection, se non lo è installalo.
Poi riprova hp-diagnose_plugin

@angelomarra - mi sa che hai lo stesso problema di ayler.

Portatile ASUS con Scheda madre X55C +i5-3210M -- 6 GB RAM ddr3 -- grafica intel.

ayler

CitazioneDal Gestore Pacchetti verifica se hai installato gobject-introspection, se non lo è installalo.
Nel gestore pacchetti non c'è ...  :hmm:
No, mi ero sbagliato. Ora lo installo  :roll:
Nostra patria è il mondo intero / nostra legge è la libertà (Pietro Gori, 1895)
https://youtu.be/ZWRji_4cvsU

ayler

Pacchetto installato ma la situazione non cambia. Mi dà sempre lo stesso errore quando cerca di installare il plugin.
Nostra patria è il mondo intero / nostra legge è la libertà (Pietro Gori, 1895)
https://youtu.be/ZWRji_4cvsU

andrea111

Installa anche il pacchetto python-dbus.

Poi collega e accendi la stampante e ricomincia con hp-checknella home troverai il file hp-check.log -- dovresti postarlo o allegarlo

Portatile ASUS con Scheda madre X55C +i5-3210M -- 6 GB RAM ddr3 -- grafica intel.

ayler

Grazie Andrea.
Il pacchetto Python-dbus era già installato.
Ecco hp-check
hp-check[3213]: info: :
hp-check[3213]: info: :[01mHP Linux Imaging and Printing System (ver. 3.19.1)[0m
hp-check[3213]: info: :[01mDependency/Version Check Utility ver. 15.1[0m
hp-check[3213]: info: :
hp-check[3213]: info: :Copyright (c) 2001-15 HP Development Company, LP
hp-check[3213]: info: :This software comes with ABSOLUTELY NO WARRANTY.
hp-check[3213]: info: :This is free software, and you are welcome to distribute it
hp-check[3213]: info: :under certain conditions. See COPYING file for more details.
hp-check[3213]: info: :
hp-check[3213]: info: :[01mNote: hp-check can be run in three modes:[0m
hp-check[3213]: info: :1. Compile-time check mode (-c or --compile): Use this mode before compiling the
hp-check[3213]: info: :HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
hp-check[3213]: info: :are installed to successfully compile HPLIP.                                   
hp-check[3213]: info: :2. Run-time check mode (-r or --run): Use this mode to determine if a distro   
hp-check[3213]: info: :supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
hp-check[3213]: info: :has the proper dependencies installed to successfully run.                     
hp-check[3213]: info: :3. Both compile- and run-time check mode (-b or --both) (Default): This mode   
hp-check[3213]: info: :will check both of the above cases (both compile- and run-time dependencies).   
hp-check[3213]: info: :
hp-check[3213]: info: :Check types:                                                                   
hp-check[3213]: info: :a. EXTERNALDEP - External Dependencies                                         
hp-check[3213]: info: :b. GENERALDEP - General Dependencies (required both at compile and run time)   
hp-check[3213]: info: :c. COMPILEDEP - Compile time Dependencies                                       
hp-check[3213]: info: :d. [All are run-time checks]                                                   
hp-check[3213]: info: :PYEXT SCANCONF QUEUES PERMISSION                                               
hp-check[3213]: info: :
hp-check[3213]: info: :Status Types:
hp-check[3213]: info: :    OK
hp-check[3213]: info: :    MISSING       - Missing Dependency or Permission or Plug-in
hp-check[3213]: info: :    INCOMPAT      - Incompatible dependency-version or Plugin-version
hp-check[3213]: info: :
warning: [01m22-19.1 version is not supported. Using 22-19 versions dependencies to verify and install...[0m
hp-check[3213]: info: :
hp-check[3213]: info: :---------------
hp-check[3213]: info: :| SYSTEM INFO |
hp-check[3213]: info: :---------------
hp-check[3213]: info: :
hp-check[3213]: info: : Kernel: 4.15.0-46-generic #49-Ubuntu SMP Wed Feb 6 09:33:07 UTC 2019 GNU/Linux
Host: donatella-HP-Pavilion-g6-Notebook-PC
Proc: 4.15.0-46-generic #49-Ubuntu SMP Wed Feb 6 09:33:07 UTC 2019 GNU/Linux
Distribution: 22 19.1
hp-check[3213]: info: : Bitness: 64 bit

hp-check[3213]: info: :
hp-check[3213]: info: :-----------------------
hp-check[3213]: info: :| HPLIP CONFIGURATION |
hp-check[3213]: info: :-----------------------
hp-check[3213]: info: :
hp-check[3213]: info: :HPLIP-Version: HPLIP 3.19.1
hp-check[3213]: info: :HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 22 distro  19.1 version
hp-check[3213]: info: :
hp-check[3213]: info: :[01mCurrent contents of '/etc/hp/hplip.conf' file:[0m
hp-check[3213]: info: :# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.19.1

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.19.1
html=/usr/share/doc/hplip-3.19.1
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.19.1
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
qt5=no
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no

hp-check[3213]: info: :
hp-check[3213]: info: :[01mCurrent contents of '/var/lib/hp/hplip.state' file:[0m
hp-check[3213]: info: :Plugins are not installed. Could not access file: File o directory non esistente
hp-check[3213]: info: :
hp-check[3213]: info: :[01mCurrent contents of '~/.hplip/hplip.conf' file:[0m
hp-check[3213]: info: :[installation]
date_time = 29/03/2019 08:07:50
version = 3.19.1

[upgrade]
notify_upgrade = true
last_upgraded_time = 1553673145
pending_upgrade_time = 0
latest_available_version = 3.17.10

[settings]
systray_visible = 0
systray_messages = 0

[last_used]
device_uri = "hp:/net/HP_LaserJet_MFP_M28-M31?ip=192.168.1.6"
printer_name =
working_dir = .

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list =

[fax]
voice_phone =
email_address =


hp-check[3213]: info: : <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>
hp-check[3213]: info: :
hp-check[3213]: info: :--------------
hp-check[3213]: info: :| COMPILEDEP |
hp-check[3213]: info: :--------------
hp-check[3213]: info: :
hp-check[3213]: info: : gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               7.3.0           OK         -
hp-check[3213]: info: : make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.1             OK         -
hp-check[3213]: info: : libtool              libtool - Library building support services                  REQUIRED        -               2.4.6           OK         -
hp-check[3213]: info: :
hp-check[3213]: info: :------------------------
hp-check[3213]: info: :| General Dependencies |
hp-check[3213]: info: :------------------------
hp-check[3213]: info: :
hp-check[3213]: info: : libcrypto            libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.1.0           OK         -
hp-check[3213]: info: : python-xml           Python XML libraries                                         REQUIRED        -               2.2.5           OK         -
hp-check[3213]: info: : libnetsnmp-devel     libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           5.7.3           OK         -
hp-check[3213]: info: : sane-devel           SANE - Scanning library development files                    REQUIRED        -               -               OK         -
hp-check[3213]: info: : pil                  PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               1.1.7           OK         -
hp-check[3213]: info: : pyqt4-dbus           PyQt 4 DBus - DBus Support for PyQt4                         REQUIRED        4.0             4.12.1          OK         -
hp-check[3213]: info: : libpthread           libpthread - POSIX threads library                           REQUIRED        -               2.27            OK         -
hp-check[3213]: info: : python-devel         Python devel - Python development files                      REQUIRED        2.2             2.7.15          OK         -
hp-check[3213]: info: : cups-devel           CUPS devel- Common Unix Printing System development files    REQUIRED        -               2.2.7           OK         -
hp-check[3213]: info: : python-dbus          Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.6           OK         -
hp-check[3213]: info: : cups-ddk             CUPS DDK - CUPS driver development kit                       OPTIONAL        -               -               OK         -
hp-check[3213]: info: : reportlab            Reportlab - PDF library for Python                           OPTIONAL        2.0             3.4.0           OK         -
hp-check[3213]: info: : pyqt4                PyQt 4- Qt interface for Python (for Qt version 4.x)         REQUIRED        4.0             4.12.1          OK         -
hp-check[3213]: info: : libusb               libusb - USB library                                         REQUIRED        -               1.0             OK         -
hp-check[3213]: info: : cups-image           CUPS image - CUPS image development files                    REQUIRED        -               2.2.7           OK         -
hp-check[3213]: info: : python2X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             2.7.15          OK         -
hp-check[3213]: info: : python-notify        Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               OK         -
hp-check[3213]: info: : libjpeg              libjpeg - JPEG library                                       REQUIRED        -               -               OK         -
hp-check[3213]: info: : sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -
hp-check[3213]: info: :
hp-check[3213]: info: :----------------------
hp-check[3213]: info: :| Scan Configuration |
hp-check[3213]: info: :----------------------
hp-check[3213]: info: :
hp-check[3213]: info: : scanext              Scan-SANE-Extension                                          REQUIRED        -               3.19.1          OK         -
hp-check[3213]: info: : hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.19.1          OK         'hpaio found in /etc/sane.d/dll.conf'
hp-check[3213]: info: :
hp-check[3213]: info: :-------------------------
hp-check[3213]: info: :| External Dependencies |
hp-check[3213]: info: :-------------------------
hp-check[3213]: info: :
hp-check[3213]: info: : gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.26            OK         -
hp-check[3213]: info: : scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.27          OK         -
hp-check[3213]: info: : cups                 CUPS - Common Unix Printing System                           REQUIRED        1.1             2.2.7           OK         'CUPS Scheduler is running'
hp-check[3213]: info: : network              network -wget                                                OPTIONAL        -               1.19.4          OK         -
hp-check[3213]: info: : policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.105           OK         -
hp-check[3213]: info: : xsane                xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             0.999           OK         -
hp-check[3213]: info: : dbus                 DBus - Message bus system                                    REQUIRED        -               1.12.2          OK         -
hp-check[3213]: info: : avahi-utils          avahi-utils                                                  OPTIONAL        -               0.7             OK         -
hp-check[3213]: info: :
hp-check[3213]: info: :---------------------
hp-check[3213]: info: :| Python Extentions |
hp-check[3213]: info: :---------------------
hp-check[3213]: info: :
hp-check[3213]: info: : hpmudext             IO-Extension                                                 REQUIRED        -               3.19.1          OK         -
hp-check[3213]: info: : cupsext              CUPS-Extension                                               REQUIRED        -               3.19.1          OK         -
hp-check[3213]: info: :
hp-check[3213]: info: :------------------------------
hp-check[3213]: info: :| DISCOVERED SCANNER DEVICES |
hp-check[3213]: info: :------------------------------
hp-check[3213]: info: :
hp-check[3213]: info: :device `hpaio:/net/hp_laserjet_mfp_m28-m31?ip=192.168.1.6&queue=false' is a Hewlett-Packard hp_laserjet_mfp_m28-m31 all-in-one
device `hpaio:/net/hp_laserjet_mfp_m28-m31?ip=192.168.1.6&queue=false' is a Hewlett-Packard hp_laserjet_mfp_m28-m31 all-in-one

hp-check[3213]: info: :
hp-check[3213]: info: :--------------------------
hp-check[3213]: info: :| DISCOVERED USB DEVICES |
hp-check[3213]: info: :--------------------------
hp-check[3213]: info: :
hp-check[3213]: info: :No devices found.
hp-check[3213]: info: :
hp-check[3213]: info: :---------------------------------
hp-check[3213]: info: :| INSTALLED CUPS PRINTER QUEUES |
hp-check[3213]: info: :---------------------------------
hp-check[3213]: info: :
hp-check[3213]: info: :
hp-check[3213]: info: :[01mHP_LaserJet_MFP_M28w_B0D94D_[0m
hp-check[3213]: info: :[01m----------------------------[0m
hp-check[3213]: info: :Type: Unknown
hp-check[3213]: info: :Device URI: ipps://NPIB0D94D.local:631/ipp/print
hp-check[3213]: info: :PPD: /etc/cups/ppd/HP_LaserJet_MFP_M28w_B0D94D_.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_MFP_M28w_B0D94D_.ppd ppd file
hp-check[3213]: info: :PPD Description:
hp-check[3213]: info: :Printer status: la stampante HP_LaserJet_MFP_M28w_B0D94D_ è inattiva.  è stata abilitata da ven 29 mar 2019 08:07:13 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
hp-check[3213]: info: :
hp-check[3213]: info: :
hp-check[3213]: info: :--------------
hp-check[3213]: info: :| PERMISSION |
hp-check[3213]: info: :--------------
hp-check[3213]: info: :
hp-check[3213]: info: :
hp-check[3213]: info: :-----------
hp-check[3213]: info: :| SUMMARY |
hp-check[3213]: info: :-----------
hp-check[3213]: info: :
hp-check[3213]: info: :[01mMissing Required Dependencies[0m
hp-check[3213]: info: :[01m-----------------------------[0m
hp-check[3213]: info: :None
hp-check[3213]: info: :
hp-check[3213]: info: :[01mMissing Optional Dependencies[0m
hp-check[3213]: info: :[01m-----------------------------[0m
hp-check[3213]: info: :None

hp-check[3213]: info: :
hp-check[3213]: info: :Total Errors: 0
hp-check[3213]: info: :Total Warnings: 1
hp-check[3213]: info: :
hp-check[3213]: info: :
hp-check[3213]: info: :Done.
Nostra patria è il mondo intero / nostra legge è la libertà (Pietro Gori, 1895)
https://youtu.be/ZWRji_4cvsU

Tony


Linux non è solo un sistema operativo ma...
"È uno stato mentale, dove prima ti perdi e poi ti ritrovi"
(cit. Point Break).
Il mio pc.

ayler

No, mi dice la stessa cosa
scanimage: open of device hpaio:/net/hp_laserjet_mfp_m28-m31?ip=192.168.1.6&queue=false failed: Error during device I/O

e contemporaneamente parte la solita procedura di installazione del plugin che termina con errore.  :bonk:
Nostra patria è il mondo intero / nostra legge è la libertà (Pietro Gori, 1895)
https://youtu.be/ZWRji_4cvsU

andrea111

Proviamo con l'installazione manuale dei plugin.

Vai Q U I e ti scarichi il .run della versione uguale a quella di HPLIP (3.19.1), lo metti nella tua home e gli dai i permessi di esecuzione (clic destro sul file, scheda Permessi e spunta su "Permetti esecuzione come programma").
Apri un terminale e ./hplip-3.19.1-plugin.run non usare il "sudo".

Attendi che termini e riprova hp-plugine vedi se dà ancora errore.
Eventualmente fa un riavvio.

Che versione di mint usi? (19.01?) serve saperlo con gli HPLIP..

Portatile ASUS con Scheda madre X55C +i5-3210M -- 6 GB RAM ddr3 -- grafica intel.